The DZ-2001 Data Wire Driver creates a trouble free data wire from the Lionel TMCC Command Base. The data wire can be run anywhere in your layout to operate switch machines and accessories from your CAB-1 remote using Z-Stuff’s DZ-2000 Switch Machine and Accessory Controller. The DZ-2001 prevents problems with switch machines wired for non-derailing operation when driven by the DZ-2000 Controller, since non-derailing operation requires connecting to COMMON the L and R inputs of the DZ-1000.

Wire Color           Function

RED                       10-14 VAC

BLACK                  COMMON

WHITE                   DATA OUTPUT  

DZ-2001 Installation: (see Figure 2)

1. Plug the DZ-2001 into your Lionel TMCC Command Base.

2. Connect the RED wire to 10-14VAC accessory power.

3. Connect the BLACK wire to accessory common or neutral.

4. Connect the WHITE wire to the data wire for your layout.

The data wire can also be directly connected to any of Lionel’s TMCC controllers that require a data line from the command base.